Upcoming kits, and WIP 4

I will start this post with a look into my future builds. The first one is something I have been waiting a long! time for. Thehelmosengine's Drehksturm! My kit is being poured as I type and I am beyond excited. As I said I have been waiting patiently for this kit to be completed. I only hope I can do justice to what will end up being the second Drehksturm ever built! The pictures below are from the first one completed by Decay. Needless to say I seriously doubt I will go with anything close to this paint scheme.

This is where I am in the prep. The kit uses the MG Zeta 2.0 frame as a base. So I am taking my old Zeta build and purple powering the old paint off so I can clean the pieces and prep them for the resin parts. 

The other kit in my future from Thehelmosengine is this guy... the Lanzegeist. The video will do way better giving you all the information if you are interested in joining me in building this awesome fully transformable resin kit.



_________________________________________________________________________________

Now WIP 4:

In current works, I have been working hard on the MSA-0011 [BST] Gundam. I have all the pieces done with initial glueing and ready for scribing and priming.

 here you can see how I lined up the pal-plates so I could fill the gaps on the shoulder pieces. After they are glued in place and it has cured; I take an exacto knife and shape it then a little sanding it all is done. Gap covered.

 Here it is with the gap covered.

 My other challenge has been lining up the gun on the arm and having it fit under the body and shoulder. So I ended up taking a really long pin and using that, but it stuck out so I took multiple pieces of plate and used Proweld on them. After letting it dry overnight the proweld took what you see below and basically chemically melted it all together so it was as simple as shaping the plastic to the wrist was longer.

 Just a quick shot of my hotel priming office.....it is so humid here that 7 hours later the primer is still tacky, and I will now officially say I am not a fan of rustoleum primers for plastic and resin. They come out too thick for this work. I am going to end up spending hours cleaning up thick primer spots.

 The scribing was also started today. Nothing amazing or new, just a quick few shots.

 And more details were added for this apparatus lots of little tubing and plate to make it look better.

 Just some true WIP photos while I was bending the plastic tube.

 And the after photos.

 Much better, now it looks like something that belongs. I am not sure why, but it was supposed to have some connector that didn't connect to anything so I thought I would just make it better. In my opinion I did.

A busy update I know, but an important one.
As always thank you for stopping by. T.G.

MSA-0011 [BST] Gundam WIP3

Where to start with what is becoming one of my favorite builds so far. And one of my most challenging as well. I suppose a little preview of the size of this thing. I used my arm for you first; you can see the gun and the fuel tank in this picture. To give you a literal measurement I took a picture with a 6"/15cm ruler. Needless to say when this build is done this Gundam will cover almost 2 feet from tail to tip of the gun.

One of the challenges I have had to face has been filling gaps in that if I just laid putty down I would have to wait a week for it all to dry completely. So I have been using Pla-plate and layering that. Here you can see my work to fill the lower chest sections. I could just sand it, but if I sand too much I will have to fix the fit of a ton of other pieces and it would make everything disproportionate.

A side view to show you the pre-clean up difference in height.

And now for fun a quick kind of "snap together" viewing.

The head is super aggressive on this guy. Even setting straight up it looks super well aggressive.

I don't know if I took a lot of pictures of the pre-clean up section of the upper chest. I took what was very smooth and well boring, and upgraded it. A lot more little details to increase visual interest.

Here is a view of the back, most of this will never be seen as the fuel tanks and back pack will cover all this up.

This photo is of the back with the fuel tank and booster packs attached.

The booster on the right is not completed in this picture.

This is what it looks like from the front.

And the lower boosters, the boosters are too heavy for me to get them to stay in place with out me holding them right now.

And this weeks accomplishment...completion of how I am going to put this guy on a base...I skipped a lot of the scratch building I am horrible at in favor of a skill I am good at...cutting and pasting. I modified a standard bases mount to meet the needs of this kit. Here you can see the after affects of clean up and pal-plating.

A fit test. I am using 5 1.8mm rods to hold this thing tightly.

And here you can see the pins partially inserted.

Its a clean look and well hidden with the boosters attached.

Fuel tanks....thats a lot of gas.

And the lower boosters with out the actual boosters attached they fall off a lot. and I normally don't leave them on so I am going to continue that trend of laziness.

Thats what I have so far.
As always thanks for stopping by. T.G.

2012 Mecha Contest Winners!!!

The winners have finally been announced...along with my two choices for winners. So in this all too rare occasion, I share my blog with other builders, two guys I look to for inspiration and motivation along with all the winners.
2012 Mecha Contest Winners!!
My picks: 

Mafo127-Mg OO gundam with resin conversion for XN raiser- winner of RG Aile strike.

P3tb- Mg GP03 custom color- winner of the Mg wing gundam EW Ver.

Congratulations to all the winners!
Next year I will be in the competition! So be ready and bring your best work! I have been hard at work on the Booster Gundam and will post an update soon. Its coming together nicely if I do say so myself.

As always thank you for stopping by. T.G.

MSA-0011[BST] Gundam WIP2

This update is a long over due one I suppose, but you will have to forgive me as I have been side tracked by Space Marines and the like for a few months now. So I give you WIP 2 for my Resin Booster Gundam. A few pictures from the work I had already completed so you can remember what I had done. I have not completed any of the final detail work, still working out the pinning and all that. See below and enjoy.

Below: The intention of this photo is to show you the fill in work I had to do so far on the shoulder.

To get the head to sit right, I took some Pla-plate and stacked and cut then. I added in some putty to clean up the lines and gaps, I still need to sand it all smooth though.

Beyond checking out my use of sticky tack to keep pieces in place, you can also see where I had to add pal-plates to the chest to fill in gaps.

This is one of the upper booster units completely pinned, just need to do some scribe work to it.

Here is something I am still debating. The gap that is created, I am not sure it I like it or not. If I have to fill it. That will mean a lot of putty work and glue followed by an obscene amount of masking(not that this thing isn't already going to use 2-3 rolls.

You can better see where the gaps are in this super bright picture.

Well, I am off to super glue my fingers together some more.
As always thank you for stopping by. T.G.